Thursday 13 December 2012

WIP WWII Russians, Plastic Soldier Company

And now for something completely different!

Regular readers ("hello mom") may recall that I visited the latest Derby Show held at a new venue at Castle Donington with my brother and old mate Ade. There we played a small demo of Warlord Games new'ish WWII rule set Bolt Action. After a game in which we somehow managed to completely wipe each other out Ade and myself decided to invest some of our future time and efforts in this game system. Ade bought the rules there and then. As mentioned previously, Ade intended to go with US forces and his rather spiffing first lot of figures can be seen here
 
I however opted to take on the mighty Red Army, purchasing a box of The Plastic Soldier Company's (PSC) plastic 28mm WWII 'Russian Infantry in Summer Uniform' from Wayland's Forge in Birmingham. Leaving the shop I noticed Warlord Games (WG) plastic Russian set and went back and bought those as well, justifying the purchase as I wanted to recreate the 'human wave' effect in games as cheaply as possible.

The Plastic Soldier Company's set has a certain retro charm but suffers from a lack of sharpness of detail compared to the figures in the WG set. I believe the masters were designed for 1/72 (20mm) scale and then scaled up to 28mm but suffering in the process. I'll detail the box contents once I've finished at least one lot of sprues worth of figures.

Added Russian M52 helmet & Ushanka fur hat (even if he is wearing summer uniform).
The box set contains three identical sprues but the majority of figures are single mouldings, not multi pose like WG but regular readers ("hello again mom") will know I enjoy chopping and changing figures whenever possible as I like to add some variety to my red horde. Having numerous spare heads from the WG box I decided the chop and change at least one of the three figures per sprue.

In this first batch I've only changed the heads (and a single hand), I hope to modify a few other bits and pieces with other figures. All the original, unaltered, miniatures are the first figure the left hand side (except for the second photo because I forgot) but hopefully the differences should be obvious.

Wednesday 12 December 2012

Dovecote

This relatively simple terrain piece is loosely based on the dovecote located at Minster Lovell, Oxfordshire.  Minster Lovell Hall was the home of Francis Lovell, 1st Viscount Lovell, a supporter of Richard III. As a leading Yorkist Lovell was instrumental in the Lambert Simnel rebellion but after his defeat at the Battle of Stoke Field, June 1487, Lovell disappeared from history.
Minster Lovell Barn & Dovecote
The structure is one of only three freestanding round medieval dovecotes that I'm aware of, the others can be found at Dunster, Somerset and Sibthorpe in Nottinghamshire, England. These high status (guess who's being watching too many repeats of Time Team lately) buildings would have provided fresh eggs and meat throughout the winter months.
Dovecote door detail
My model has been made to match the slate tiles and rendered walls of model of the great round tower. The main structure is made from a cut off piece of the inner cardboard tube from an industrial roll of PVC foil 3 1/2" (89mm) dia. The low doorway was cut out with a small saw, the door made from wooden coffee stirrers and the door way made from small rectangular section wooden pieces.
 
The main roof was made from a cone of scrap cardboard with the apex cut off. The circular cap on the main roof is made cutting off the inner plastic top of a Citadel paint lid to form a ring.
 
I did initially try to glue three uprights directly to this ring but they broke away with the lightest of contact so I had to come up with another method. Eventually I trimmed the bottom of one of those tiny shampoo bottles found in hotels, pierced it so I could push three small lengths of barbeque skewers though it which would support the conical apex and plugged the hole in the roof. As with the round tower the roof tiles were cut from scrap packaging, starting at the lower edge and working upwards, decreasing the size of the tiles as I progressed. The apex of the roof was made from a small cone of the cardboard, covered in cardboard tiles and wedged onto the vertical barbeque sticks, stuck down with liberal use of PVA woodglue. 
 
A curious feature with the Lovell and Dunster dovecotes are the very low entrance doors, both are only around 3' (1219mm) high. The knight figure above gives quite an accurate sense of its height. I'm not sure of the reason for this, I can only assume it was to maximise the internal space(?).
 
The scale of the model isn't that accurate to the original building, the diameter of the tube is too small and the pitch of the roof is too steep but as it's only for my personal use I'm not overly concerned about such details (my model, my rules afterall). I think it makes an interesting (to me, at least) alternative to the usual structures seen on a gaming table.

Monday 10 December 2012

(Bargain) Medieval Tents

These model tents are based on an idea which I blatantly stole was inspired to try in order to make my own versions after reading a post on Pauls Bods excellent blog. The original post can be found here. For my version I used cardboard rather than paper (actually the packaging from various boxes of plastic miniatures).

A quick Google ("All Hail") Image search normally protrays of medieval tents as having an alternate two colour style but I was curious if this was historically accurate. I had a rummage through a couple of my reference books and I noticed that the few contemporary illustrations of medieval tents, that I could find, had quite ornate decorations which I have tried to replicate in the two tents detailed below.




The painting is quite crude but I completed both of them in less than a hour to help past the time. Despite using the paper template I now think my initial efforts (below) were too big but were still useful practise pieces.

Future efforts will be tweaked slightly. I intend to double the number of sides so the tents resemble the ones I've seen in my reference books. I will also add an open flap (none the examples above have one) and attempt to give one a more accurate (and more difficult) paint job. Once I'm happy with the results I'll post a quick tutorial. I realise it's far easier and quicker to purchase and paint plastic/resin models but in this day and age the option of creating something for free out of scrap is always a nice alternative to have available.

Friday 7 December 2012

Carreg Coetan Arthur (neolithic dolmen)

A few weeks ago my brother and myself travelled into the wilds of Pembrokeshire to the south west tip of Wales. Just one of the many sites we visited over a weekend was Carreg Coetan Arthur. This is a neolithic dolmen (burial chamber) near Newport which dates from around 3000 BC. This dolmen is just a few miles north of the Preseli Hills which was the original source of the Stonehenge bluestones.
The site is actually located on a small private housing estate, within a few feet of someone's bungalow which definitely impacts on your first impression of the place. How and why the local authorities allowed housing to be built so near to this scheduled ancient monument is slightly puzzling. For one lucky householder it almost appears that they have massive, unique ornamental garden feature in their garden. It's better than a garden gnome I suppose.
The remains consist of a four metre long capstone lying horizontally across four smaller vertical stones. The capstone actually only balances on two of the uprights, something I only noticed when I was crouched underneath and which prompted me to move out the way pretty quickly, even though it has probably been like this for many hundreds, even thousands, of years.
 
The grave would have been originally covered with earth; smaller stones would have been used to a create a facing for the entrance of the tomb, several large stones still lie scattered nearby.
 
The idea for the model came about after reading this post by Mad Guru where he used large wood
chippings to create models of rocky outcrops. Thinking I could use a similar technique I kept on the lookout for appropriate material. I must have had some funny looks from people visiting the German market in Birmingham who may have wondered what I was doing, apparently staring into the empty flowers beds in the city centre when I was actually looking for suitable pieces of chipping.

 
However after I was unable to find any pieces that I could use for the model I decided to use blue foam instead. As the foam is very easy to cut and carve I realised I could make a more accurate model of the Carreg Coetan dolmen.

The foam uprights were stuck on to an old CD with wood glue. covering the central hole in the CD with a piece of plastic card at the same time. Once happy with the positions the CD was coated with wood glue and then covered with small stones and sharp sand. After being left to dry overnight I then fixed the capstone in place. To help secure it I cut small straight sections from a paperclip, dipped into wood glue and stuck these into the upright stones, pushing the capstone on top and once again left it to dry overnight.
The foam appeared a bit too smooth so in order to add texture I applied a thin layer of watered down ready mixed plaster, using a old stiff brush to give it a rougher, more stone like effect.
Once the plaster and glue was dry I drybrushed the stone, building up the layers of grey paint until finally finishing off with a white paint.

After applying several layers of matt varnish, and once again leaving to dry (making this model seemed to involve an awful lot of waiting), the model was finished off with grass and a couple of randomly placed tufts.

Wednesday 21 November 2012

Award Winning Blog (cough, cough)

I don't normally fill in online questionnaires or do any 'internet meme' (I had to look that phrase up) that routinely do the rounds on the bloggosphere. The principle reason for this is because I have very limited access to the internet i.e. only at work. Any site containing the word 'game' is routinely blocked so I try and keep lurking and posting to a necessary minimum. So apologies if I don't get a chance to comment, reply to or miss messages.

However I was very flattered when I received a message from Michael over at 28mm Victorian Warfare. I was also prompted to do this after reading a post from The Lair of the Breviks by Andy Walker. Regarding this Liebster Blog Award thingy Andy puts it far better than I ever could:

"This little number has been doing the rounds in the blogosphere - it's a rather nice way of getting other people's blogs noticed, which I'm all in favour of. There's so much good stuff out there, and there may be one or two that you never knew existed....and we need to share the spotlight."

Therefore, largely ignoring the original award criteria (my blog, my rules), I'd highly recommend the following sites, in no particular order:

Colonel o'truth - some amazing fantasy conversions and paint jobs.

Harness and Array - stunning medieval figures and plenty of historic background information.
Life in The Man Cave - my mate Ade's blog. As genuinely nice and funny in real life as he is in his videos. (2300+ YouTube followers can't be wrong). He's too modest to promote his own stuff but I'm not, so I will! 

Army Royal - even more beautiful converted and painted medieval figures with the relevant background info.

28mm Victorian Warfare - both top notch quality and quantity from Michael's many varied figures. Always a pleasure to read his blog. If you haven't visited his site, please do. The variation of figures presented and the skill level of the painting makes regular visits well worth while.

You may notice that these blogs strongly feature modelling and conversion work, which shouldn't be not surprisingly as it's my favourite bit of this hobby.

Honourable mentions must, of course go to Ray's Don't Throw a 1 and Fran's The Angry Lurker. There aren't many posts that genuinely make my laugh of loud but those from Ray and Fran regularly do so. Depending on your age they are either the 'Morecombe and Wise' or the 'Ade Edmondson & Rik Mayall' of blogging. I was going to say they were the 'Bottom of the Blogosphere world' but that sounds rude. (I still have happy memories of crying with laughter watching some of that first series in a Dublin hotel in the early 90's with Guinness shooting out my nose). 

Always encouraging and complimentary with their messages (although not always to each other!) Ray and Fran are genuine stars of Blogger.

Thursday 15 November 2012

Ox Wagon, Perry Miniatures

Yes, I'm finally back on the wagon! Well, at least painting-wise (apologies for the awful pun). This is the first set of miniatures I've painted since at least September but this isn't the new set of figures I promised in the previous post, which I hope to complete and post on here shortly.

This is the 'Ox wagon, (includes wagon, baggage, 4 oxen plus drover, woman and child) 'Code: WR24 currently £20.50 from Perry Miniatures.

Opening up the two boxes, you are confronted with a multiple of metal and resin components. Most of the parts are obvious, for instance the ox come with separate heads but I couldn't work out what four particular items, which looked like bent pitchforks, were supposed to be. After eventually checking their website I found that they fitted vertically over the top of the wheels and fixed to the carriage. I left these off the final simply because I didn't like the look of them. I'm sure they are authentic given the Perry's reputation for accurately but I thought they just looked a bit odd.



The set comes complete with three human figures the drover, woman (with a baby) and child, shown above. As the set is part of the War of the Roses ranges the figures are suitably detailed however my brother reminded me that he had picked up another figure that would also go well with this ox set.


I have no idea who the manufacturer of this figure is, my brother found it in a back room of Spirit Games in Burton in a pile of second hand figures. The figure still had traces of paint and a fair amount of flash on it but I can only guess that it's quite old. After a quick clean up I repainted him. The only thing missing is his jar of cider and a straw in his mouth.

Using the same technique I had previously used on the trebuchet model I've made the figures removable. This way I can use the original figure for medieval/Cry Havoc games and the other (mystery) figure for any period from the 17th C onwards.

The resin luggage is nicely detailed, there's even a big old cauldron hidden in amongst there if you have a close look.

Thursday 8 November 2012

Great Round Tower Hourding


This is the latest WIP for my 'little' Great Round Tower side project. The Tower itself isn't finished but I have managed to complete the hourding itself (hurrah!).
Hourding Detail

The colour choice for the tiles was easy, these were simply painted to resemble slate. As I've previously stated I had intended to finish the woodwork a more standout colour scheme, namely red. And I did indeed paint this part of the model red. Not entirely happy with the results I left the model alone while I was trying to figure out the stairway and entrance (in fact, this is still very much an ongoing problem).

However on a recent holiday in the south east of England I had a chance of mind. On the very last day of our visit (we finally managed to visit thirteen castles in total, that's not counting forts, towers, churches, manor houses and other historic sites) we arrived at Dover castle, still one of the largest and most impressive castles in the country.

It was within the great square tower itself at Dover where I had the opportunity to speak to one of the guides. The interior of the keep has been recreated to how it may have looked during the time of Henry II's reign. Ironically (at least I thought so) as the building is listed the walls couldn't be painted so the wall hangings have been introduced to give the impression of the colour scheme. Every detail would have been made to impress, including the choice of the colours. Blue, green and red painted furniture would have cost a small fortune. The guide informed me that, for instance, the blue colour would have been made with lapis lazuli which was sourced from as far away as northeastern Afghanistan. Green was made from the mineral malachite.

It was with this in mind that I decided to repaint the hourdings to resemble plain wood. As I had previously wasted a small pot of Citadel paint with my previous effort I headed to the nearby DIY store (B&Q) and purchased a few test pots of emulsion. I eventually ended up using Crown Ultimate Cream Dark matte finish. The colour is quite similar the Citadel's Baneblade Brown but at around £1.50 for 75ml for a test pot is a bargain, especially if you're painting a large scale object, but I would recommend watering them down slightly.

The hourdings were painted in the new colour scheme but with a small exception. Next time you visit a castle take a look above the main gateway. Sometimes you can spot the builder's family coat of arms carved in stone. Nice examples can still be seen at Bodiam castle.

Wardeux, Dalyngrigge and Radynden family shields. The carving above the shields represents the castle's builder, Sir Edward Dalyngrigge, tilting helmet complete with unicorn.
 


There are also several very large (modern) kite shields above the King's (?) gateway at Dover. So I thought I'd try and recreate something similar. Coincidently Dover had been defended by Hubert de Burgh, builder of Skenfrith, against Prince Louis in the great siege of 1216 (and again in 1217). I painted the vertical timber pieces using the coat of arms of de Burgh as a refernce. The unusual pattern, known as vair, is based on heraldic representation of patches of squirrel fur in an alternating pattern of blue and white.

"The squirrel in question is a variety of the red squirrel. In the coldest parts of Northern and Central Europe the winter coat of this squirrel is blue-grey on the back and white on the belly, and was much used for the lining of cloaks called mantles. It was sewn together in alternating cup-shaped pieces of back and belly fur, resulting in a pattern of grey-blue and grey-white which, when simplified in heraldic drawing and painting, became blue and white in alternating pieces." - Wikipedia

Happily there were two timber uprights that were positioned either side of the doorway, this enabled me to place a shield centrally above the doorway (this was down to pure luck rather than design). The shield is a taken from a Google Images file of de Burgh's coat of arms, stuck to a piece of cardboard and then trimmed to size. Now I only have to worry about making that infuriating entrance porch and the curved flight of steps!

Monday 22 October 2012

Life - WIP

Just a quick post to reassure the faithful readers of this blog that I am still alive and well(ish). As I'm sure is typical of a great many of follow bloggers daily life keeps on getting in the way of my hobby.

After far too many years of drinking honey sweetened ale (Enville, in case you're wondering) and eating pork scratchings my teeth decided they'd had enough and opted out (literally in one case). I've since been affected with a quite unpleasant dental infection left me looking rather like Sloth out of the Goonies. Any form of modelling or painting has been greatly hindered as I sat around feeling generally sorry for myself. A subsequent visit to the dentist has left me stuffed full of antibiotics, the looming prospect of heavy duty pliers, dentures (blimey, I felt very old when the dentist said that!) and very little spare cash.
I love Chun...castles!
However it isn't all doom and gloom (honestly). I have managed to make progress on the great tower. The wooden hourding have finally been painted, well, several times actually. I had initially painted the woodwork red but this looked plain awful. I hope to post pictures of the WIP as soon as I can.

If you thought the main hourding was complex (and you'd be right, it was) the stairway and entrance is proving to be a nightmare. The combination of the open woodwork and the curved nature of the stairs is proving a very tough nut to crack, at least in order to make it look reasonably accurate and lifelike.

The one strange result in the recent lack of any painting (five weeks plus now and not a paintbrush in sight) is that I now want to paint and finish something. The next figures in the sights will be something completely different, from a manufacturer never previously seen on this blog and which I've been strangely felt compelled to paint (what a tease!). If I can get these done soon then I think I will finally be able to get back into a productive painting phrase.

This message was brought to you by Doggy Dentures,
proud sponsor of Ubique.

Tuesday 9 October 2012

Derby Wargame Show 2012

On a beautiful bright autumnal Saturday, my friend Ade, my brother and myself travelled deep into the far east, well to the Derby Wargame Show at least. The event this year was at Donnington race track after being previously held at Derby University. This is the only other wargaming event I regularly attend apart from the local WMMS (Alumwell) show.
new venue
Finances are as tight as ever this year so I had to chose my purchases carefully. From the Dave Thomas stand I picked up a Perry Miniatures ox drawn wagon, I had planned to buy a number of Crusaders packs of crossbow men to go along with my other Crusader figures for my Cry Havoc project but there were none available. However Crusaders loss was Curtleys Miniatures gain, from whom I also bought a number of knights, archers and flags. Apart from a book on War of 1812 and a few Knuckleduster figures that was it. 

Ade, the main man behind wargamingforfun, is interested in gaming something entirely different from his usual Warhammer fantasy stuff and is looking at getting into WWII games, which before the weekend was initially going to be Flames of War. Knowing that Warlord were in attendance and demonstrating their new Bolt Action game we decided to linger around their stand until we had the opportunity to have a go. I won't detail the gaming dynamics but it was easy enough even for me to pick after a short while. After a few turns, where I controlled the British and Ade the Germans, the game was quite evenly balanced despite the fact that I'd stupidly left my command figures hopelessly exposed in the middle of a field where they were promptly shot to pieces. 
Warlord's Bolt Action demo game
Image courtesy of Goose

Ironically (or fortunately depending on your point of view) in the action shot of us above playing the game you can't actually see me. Ade is just about visible to the left of the table and my brother is to the right. Note the awaiting crowd ready to carry me on their shoulders, victorious from the battlefield.

Knowing that several other attendees were waiting to have a game and playing up to the audience slightly, I decided to go for 'Death or Glory' tactics. My brave boys fixed bayonets and went in with cold steel against Fritz. To paraphrase Corporal Jones from Dad's Army, "They do not like it up 'em, they do not like it up 'em.". Result? They certainly didn't like it up 'em. It was absolute bloody slaughter! Everyone was wiped out, British and German alike. In fact the only figures left on the table were the two support units, the German mortar and the British machine gun crews. 
Warlord Bolt Action Demo - note my casualties in the bottom corner
Apparently I had won but I only realised this when Ade said "Congratulations" and shook my hand. As the only figures left on the table were the two British Bren gun operators I think it would be definitely classify as a Pyrrhic victory. I wouldn't like to be a squaddie under my command. Ade and myself both enjoyed the game.

After playing the demo we're both keen to take up the game properly, Ade bought the rule book soon afterwards. There is only one slight drawback; neither of us wants to play the Germans for various reasons. I recognise this may seem unusual but Ade would prefer to play as the British, Commandos etc. and I'd rather play as the Russians. To get round the rather obvious problem of not having any historical or traditional 'baddies' to play against we thought we may try and play it as an alternative history - May/June 1945 where British/Americans fight against the Russians. From what I've read it was a quite common belief amongst German soldiers later in the war that, at the very last moment, the Germans would join up with the western Allies to defeat the advance of the Communist threat. Considering what actually happened soon after the war finished (Berlin airlift, Iron Curtain, Cold War etc.) isn't as far fetched as it may initially sound. 

There was way too much going on to detail everything that caught my eye but I'd like to single out a few things that worth noting. 


A simple game based on the battle of Naseby put on by a very friendly and approachable Stoke-on-Trent wargaming group. The game and table were quite minimum but the figures and terrain were nicely done (one of the chap sells his stuff online - The Bunker 13) The emphasis seemed, correctly in my opinion, to be put on the gaming aspect of wargaming.

There was a jolly nice chap demonstrating how to paint 6mm (Baccus) figures. Yep, shock horror, I do plan to paint two armies of these tiny terrors but more of that in the future post. He gave a very useful and informative idiot's guide (i.e. so I could understand it) to painting up these figures. It's basically a whole different approach to painting to what I'm used to. I couldn't quite work out why the painter appeared to be was dressed as a pirate though, I can only assume he was taking part in demo game or perhaps he was attending a fancy dress party straight after the show.

One thing I did find surprising was the low presence of Dark Age games, only the one was being played as far as I'm aware. Considering the buzz on the blogoshere I thought there would be more but there were plenty of traders that had the stock for sale. The majority of games seemed, to me at least, to be WWII based using various scales.
Pirate demo game

All in all a very pleasant day out. The venue was large and there was plenty of space to wander around. The new location was easy to find but the noise of racing cars on the adjacent track did start to become annoying after a few hours. Food and booze was relatively expensive but perfectly adequate.

One thing that made me chuckle late in the day was when Ade said, "If ever we decided to become master criminals, such a show would be the perfect hideout." When the call went out to be on the lookout for rather chunky, 40 plus, bearded males with glasses then there would be at least several hundred suspects we could hide amongst.

Monday 1 October 2012

Church/Great Hall Building

The model detailed in this post is one I made for Arjun (Cor Blog Me), after he kindly sent me a number of ECW figures as a trade. The model is loosely based on the medieval St. Teilos church now located at the National History Museum at St. Fagins. The model is made, more or less, entirely from foamboard, cardboard and wooden coffee stirrers.
The original St. Teilo’s church,
St. Fagans National History Museum
 
Reduced model version of St. Teilo’s church (with Porch)

After a very long wait for Arjun, this is the completed model. A few of the technical puzzles I encountered while making this model included:
  • Making a freestanding structure with removable roof complete with bell tower/chimney,
  • Removable porch,
  • Sloping gable walls,
  • Unusual windows/tracery,
  • Stone effect walls. 
Gable View
Arjun asked that the building be single span around seven inches long. A nice touch that Arjun asked for was to make the porch separate, something that would have never occurred to me. This simple idea allows the model appear more like a church (with the porch) or a substantial home or great hall (without the porch) where the bell tower could represent a chimney for the great hall.

I believe I'm correct in saying that the majority of early medieval buildings would have been covered inside and out with plaster or render (as were most Roman structures). Occasionally this thick plaster is still be seen on the interor walls of castles (and, even rarer still, on outside walls such as at Conway). The only stone work left visual, I assume, would be the high quality dressed stone (such as the imported Caen stone on Norman keeps, for instance) normally only seen on the corner edges of square towers and around windows or door ways. This actually makes producing a model of a stone building relatively easy.

The effect of the painted plastered stone walls seen here was taken from a technique I remembered reading as a kid in an article many, many years ago in Military Modelling. The piece by the late, great Ian Weekley (a genuine master-model maker) showed the very simple method of sticking random pieces of rectangular card (I think he may have used thick blotting paper, remember that stuff? kids - ask your parents) on to a wall and then painting over it with textured paint, I think this was basically regular paint with a tiny amount of fine sand added.

Roof tiles were made from strips of cardboard, and then using a pair of scissors simply cutting notches at regular intervals. This was then stuck on the foamboard roof with PVA woodglue. These were painted to resemsble Welsh state (naturally).

A small bell in the tower was made from greenstuff glued to a length of chain and painted bronze.

The windows were made from plastic card which I drilled and cut so that it resembled ornately carved stone. I then glued a matching piece of clear plastic (taken from a piece of packaging) to the back and then fixed all this into the rectangular hole cut into the foamboard wall.

The main door was made from (yep, you've guessed it) coffee stirrers. The door actually swivels on hinges that I made and built into the wall. It's probably a bit too detailed and boring to describe how I did this without WIP photos (apologies).

I realise I probably should have taken some WIP photographs but this particular model was made almost entirely in the early hours of the morning when I often can't get to sleep and so listen to Radio 4 Extra (at the time it was Journey into Space - The Red Planet with Jet Morgan, Mitch, Doc and Lemmy - pure 1950's Sci-Fi audio popcorn). To be perfectly honest I normally forget to take any photos or usually don't want to stop, create enough space and take snaps once in the 'flow' of actually making the model, especially at two o'clock in the morning. 


The floor was covered in sand and painted  simply to the cover up the smooth surface of the foamboard.

The 'painted' interior murals are scaled down colour photocopies of the actual paintings that were recreated inside the church.

If you'd like to see some decent photographs than you can can find more on Arjun's blog:
Cor Blog Me St Teilos Church